For installing Dymetrol® into drop-in frames, booth seating and waterfall front edge seats
This method simplifies installation for many types of seating by eliminating stretching tools and expediting manufacturing processes. It involves first stapling the fabric to the outer edges of two, three, or four of the same or different sized frames and then using the frames themselves, wedged against each other, to produce the required stretch.
Width of the Dymetrol® is determined as follows:
- Measure distance “D”
- Multiply “D” x 0.95 = Width of Dymetrol® (monofilament length minus 5%)
- Be certain that black monofilament is installed so it places seat joints in compression and is on the underside of the deck.
Prior to installation, break all sharp edges where the Dymetrol® will come into contact with the frame. Use recommended staple and staple pattern. Refer to Bulletin No. 1 (H-04610)
